"Standardized" DB37 for wiring bundle/ MS2?
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 19
- Joined: Mon Jul 15, 2013 10:00 am
"Standardized" DB37 for wiring bundle/ MS2?
I recently bought an MS2 kit (MS230-K) with the "Map Daddy" upgrade
https://www.diyautotune.com/product/ms2 ... 4-upgrade/
and the wiring bundle for a harness, this one:
https://www.diyautotune.com/product/meg ... ndle-long/
I guess I expected a "default" wiring scheme for wire color -to DB-37 pinout but have not found one layed out?
https://www.diyautotune.com/product/ms2 ... 4-upgrade/
and the wiring bundle for a harness, this one:
https://www.diyautotune.com/product/meg ... ndle-long/
I guess I expected a "default" wiring scheme for wire color -to DB-37 pinout but have not found one layed out?
Re: "Standardized" DB37 for wiring bundle/ MS2?
Go to the hardware manual for your MS linked to from the top of this page. Find Schematics. You'll then find the DB37 showing which pin does what, and cross reference to the list given in your second link.
Rover SD1 3.5 EFI
MS2 V3
EDIS
Tech Edge O2
London UK.
MS2 V3
EDIS
Tech Edge O2
London UK.
-
- MS/Extra Newbie
- Posts: 19
- Joined: Mon Jul 15, 2013 10:00 am
Re: "Standardized" DB37 for wiring bundle/ MS2?
Roundabout way to do things LMAO but I got it. I don't have a color printer so THAT is a PITA, thanks!!
Re: "Standardized" DB37 for wiring bundle/ MS2?
Think you can buy long looms with the same wires with a DB37 already fitted.440roadrunner wrote:Roundabout way to do things LMAO but I got it. I don't have a color printer so THAT is a PITA, thanks!!
Rover SD1 3.5 EFI
MS2 V3
EDIS
Tech Edge O2
London UK.
MS2 V3
EDIS
Tech Edge O2
London UK.
-
- MS/Extra Newbie
- Posts: 19
- Joined: Mon Jul 15, 2013 10:00 am
Re: "Standardized" DB37 for wiring bundle/ MS2?
FOUND IT!! Chart is page 15 of the hardware manual. Off to the soldering station!!
-
- Site Admin
- Posts: 39617
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: "Standardized" DB37 for wiring bundle/ MS2?
For a DIY install in particular, you really do need to read the relevant sections of the Hardware Manual and Setting Up Manual.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- MS/Extra Newbie
- Posts: 19
- Joined: Mon Jul 15, 2013 10:00 am
Re: "Standardized" DB37 for wiring bundle/ MS2?
Not sure what you mean by that as I'm just getting started, but I guess I expected the harness pinouts to be in with the rest of the diagrams and schematics Page 15 or so is a long long ways from 167 -ish LOLjsmcortina wrote:For a DIY install in particular, you really do need to read the relevant sections of the Hardware Manual and Setting Up Manual.
James
But it's all wired now. I'll spend part of an evening wiring up a DB connector for 40 some bucks difference!!!