Running a Hella SSR H41773001

General support questions and announcements for MS3. See also MS3 manuals.

Moderators: jsmcortina, muythaibxr

Post Reply
vw_chuck
Master MS/Extra'er
Posts: 633
Joined: Wed Dec 11, 2013 1:16 pm

Running a Hella SSR H41773001

Post by vw_chuck »

Guys trying to get this Hella SSR working for fuel pump control. No matter how I hook it up it runs the pump. I apply the MS3X control signal and ground on the on the control pins and it stays running. I also tried the MS3X signal and positve on the control pins and it still just keeps the pump running. The pump stays on all the time no matter what. Any thoughts anyone else run into these issues?
Thanks
Last edited by vw_chuck on Wed Jan 03, 2018 1:27 pm, edited 1 time in total.
elutionsdesign
Super MS/Extra'er
Posts: 1341
Joined: Mon Sep 05, 2011 1:20 pm

Re: Running a Hella H41773001

Post by elutionsdesign »

Graduate of EFI University.

I build, repair, install and tune Megasquirt systems in North Dakota and beyond!
billr
Super MS/Extra'er
Posts: 6828
Joined: Sun May 15, 2011 11:41 am
Location: Walnut Creek, Calif. USA

Re: Running a Hella H41773001

Post by billr »

Post a sketch of the circuit. That will avoid a lot of questions.
vw_chuck
Master MS/Extra'er
Posts: 633
Joined: Wed Dec 11, 2013 1:16 pm

Re: Running a Hella H41773001

Post by vw_chuck »

I tried everyway possible to hook it up. Just sent it back and got a Dorman 902-310 and it works perfect plus it handles 40 amps.
Post Reply