1) The AFR as reported by this code:
Code: Select all
case 1514:
AFR = (float)(word(0x00, rxmsg.buf[1]));
2) I would like to be able to log brake actuations (I get TPS and it would be useful to be able to know exactly where I hit the brake)... I could I guess steal the brake light and put it into an input on the teensy, but it would be neater to fire it into the MS and grab it via CAN along with the TPS, RPM etc. Is there a standard way to do this? A best input? any signal processing/filtering? A better idea? (Load cell on the pedal pad was one thing I thought of!)
I am using a MS2 V3.0 with MSExtra 3.4.2.
Cheers - Neil G