Hello everyone!,
I'm a sophomore mechanical engineering student. I was recently assigned to a project in which I had to start an engine. All I have is:
-The engine (Daihatsu KF-DET [660cc])
-An MS3pro
-A 12V battery
They say that they need me to get the engine started and wire up the MS3pro for tuning. I've barely scratched the surface. I have a lot to learn. I don't even know how to get the engine started. I was hoping that some people on this forum may be able to help me get started. Perhaps some books or manuals that can serve as step-by-step guides (both for starting the engine and connecting the MS3pro to it).
Any help would be immensely appreciated at this point. Thank you all in advance!
How to get started with MS3 pro
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39620
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: How to get started with MS3 pro
The starting point is to download and read the MS3-Pro manual - there is lots of good information in there. You'll find that under the 'Manuals' link above.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Super MS/Extra'er
- Posts: 2221
- Joined: Tue May 04, 2004 8:20 pm
- Location: St Louis
- Contact:
Re: How to get started with MS3 pro
I have a youtube channel designed to help people learn this stuff.
https://www.youtube.com/c/AndyWhittle_HowEFIworks
https://www.youtube.com/c/AndyWhittle_HowEFIworks