Is it safe run 4 HIz injectors in series?

A general forum and a place for initial or prospective users. See Manuals/Documentation
Click here to enter
Contact a Forum Administrator
If unsure where to post, post in this sub-forum.

Moderators: jsmcortina, muythaibxr

Post Reply
BraneDeadx
Helpful MS/Extra'er
Posts: 115
Joined: Mon Sep 12, 2005 3:50 pm
Location: Modesto CA
Contact:

Is it safe run 4 HIz injectors in series?

Post by BraneDeadx »

I had quick question , with my project in future i plan run dual bank injectors.... currently i want to just run 4 standered bosch (14.8 ohm) hi inpendence injectors in parralleon one of the fuel injection banks on the MS2.... is this "ok" practice sence there tied together will this drop the ohms down to around 3~4?? or is it safe?/

Sean...
Last edited by BraneDeadx on Fri Oct 07, 2005 2:36 pm, edited 1 time in total.
Im hear to take over everyone and there megasquirt, ive been there done that with my own EFI gizzmo's check my site out for more!! :)
BraneDeadx
Helpful MS/Extra'er
Posts: 115
Joined: Mon Sep 12, 2005 3:50 pm
Location: Modesto CA
Contact:

?

Post by BraneDeadx »

i goofed up i dont want to run them in series i ment to say parralle have them all wired up same , postive postive negitive negtive all for 4 them....
Im hear to take over everyone and there megasquirt, ive been there done that with my own EFI gizzmo's check my site out for more!! :)
Post Reply