R48 For Board Assembly

Ask questions about DIY board assembly issues, fault finding and testing. (Covers all Megasquirt versions and board.)

Moderators: jsmcortina, muythaibxr

Post Reply
ffr3247r
Helpful MS/Extra'er
Posts: 87
Joined: Sun Dec 01, 2013 3:38 pm

R48 For Board Assembly

Post by ffr3247r »

I am not seeing a R48 on the board. I see A R49 and in the diagram it shows a resistor soldered in this location. Is this a typo? is R48 actually R49?
66 Mustang Turbo 6.0 LS on MS3X 80lb Deka injectors Tunerstudio Ultra and MS3 1.5.1
Top
ffr3247r
Helpful MS/Extra'er
Posts: 87
Joined: Sun Dec 01, 2013 3:38 pm

Re: R48 For Board Assembly

Post by ffr3247r »

Nevermind. Got it. 48 is difficult to read. Almost looks like 49 on the board.
66 Mustang Turbo 6.0 LS on MS3X 80lb Deka injectors Tunerstudio Ultra and MS3 1.5.1
Top
Post Reply

Return to “Board assembly and testing”