This one is using an MS3X on a turbocharged 225 slant six. This video shows a first drive on a rebuilt engine.
First drive on rebuilt engine
As you can see, it's going to need some tuning; I will be posting updates as I progress along with some videos on tuning tips.
My 1966 Dodge Dart
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
My 1966 Dodge Dart
Matt Cramer -1966 Dodge Dart slant six running on MS3X
-
- Helpful MS/Extra'er
- Posts: 100
- Joined: Wed Jan 05, 2022 2:16 pm
- Location: Springfield Oregon, Corrales New Mexico
Re: My 1966 Dodge Dart
I'll be looking forward to the tuning progress. Since I also have a turboed Slant I'm especially interested in seeing how your ignition timing table is configured.
Turbo Slant Six in a highly modified S10 chassis
MS3ProEvo
The Car https://www.s10forum.com/threads/ss-10.855639/
The Motor https://www.slantsix.org/forum/viewtopi ... 12&t=56352
MS3ProEvo
The Car https://www.s10forum.com/threads/ss-10.855639/
The Motor https://www.slantsix.org/forum/viewtopi ... 12&t=56352
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: My 1966 Dodge Dart
It's more or less starting with some examples of common distributor curves I've seen on slantsix.org made into a table at 100 kpa. The idle area does have a bit of a "pocket" to promote stability. Final values will have to wait for a dyno tune or dragstrip test and tune event.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
-
- Helpful MS/Extra'er
- Posts: 54
- Joined: Wed Jul 06, 2016 3:37 am
Re: My 1966 Dodge Dart
We need pics from under the hood! Very cool project!