Long time mega/micro user, just installed a new diy auto tune microsquirt, harness and updated firmware
Launch control will not activate on tuner studio (clear to green box) or activate on the microsquirt
Pin 6 flex (tuner studio launch to flex) 10% throttle 4k rpm limit
Tried direct grounding pin 6 flex starting car.,vno change
Swapped to spare adc in tuner studio and repeated direct grounding with no change
All criteria is met above 10% throttle,rpm and obviously its running and can't get it to activate on either input pin
I feel like maybe I'm missing something obvious I've read for hours in the manual ,here and Google lol
Application 3cyl Suzuki G10 (geo metro) using 7pin HEI for ignition control (timing control works)
Diy auto tune microsquirt launch control
Moderators: jsmcortina, muythaibxr
Re: Diy auto tune microsquirt launch control
Correctly identify your MS ecu here
Read the Do's and Don'ts to avoid the common pitfalls before starting your install or asking for help
Use only these manuals other manuals may cause brain damage or worse.
Read the Do's and Don'ts to avoid the common pitfalls before starting your install or asking for help
Use only these manuals other manuals may cause brain damage or worse.
Re: Diy auto tune microsquirt launch control
Are you using spark cut, or fuel cut to effect the launch control? Spark cut doesn't work with things like the HEI7 module.
Temporarily shut down - back soon!
QuadraMAP Sensor Module -- PWM-to-Stepper Controller -- Dual Coil Driver
Coming soon: OctoMAP Sensor Module
TTR Ignition Systems
QuadraMAP Sensor Module -- PWM-to-Stepper Controller -- Dual Coil Driver
Coming soon: OctoMAP Sensor Module
TTR Ignition Systems