Convert a big block Chevrolet to MPI

Testing and development of Megasquirt 3

Moderators: jsmcortina, muythaibxr

Post Reply
Madmach
MS/Extra Newbie
Posts: 1
Joined: Sat Nov 25, 2023 2:00 pm

Convert a big block Chevrolet to MPI

Post by Madmach »

What do I need to change my bbc to mpi? I have a gold box setup for a LS so I would need a harness, crank and cam sensors. I have a holley efi 4500 oval port manifold without the injectors and throttle body. What type of injectors are needed? I already have 2 o2s sensors installed. What else is needed?
SwedCharger-67
Experienced MS/Extra'er
Posts: 265
Joined: Sun Dec 23, 2012 2:20 pm
Location: Nordmaling, Sweden

Re: Convert a big block Chevrolet to MPI

Post by SwedCharger-67 »

I think the best is to read the manual and understand how the system works. It's a fairly complex operation to get a perfectly running engine and I think it's difficult to achieve that without a basic understanding as a starting point.
Martin, Sweden
Mopar 512 cui, 8.4 liters, high compression, fuel E85, full sequential control by MS3X, burning rubber just blipping the throttle... :D
Post Reply