Hello,
Can some please help me clarify something. I am currently running ego on Canbus using a AEM X series WB. Can I run a LD performance Standalone Electronic Throttle valve controller on Canbus?
Question on Canbus
Moderators: jsmcortina, muythaibxr
-
- Master MS/Extra'er
- Posts: 706
- Joined: Sat Mar 17, 2012 10:13 pm
Question on Canbus
98 VW golf gti vr6 turbo 8:5:1 cr ported and polished full ferrea race valves train 276 cams custom short runner intake Borge 366 sx-e turbo forge wossner pistons, balanced rotating mass, limited slip 6 speed deka 750Lbs injectors on ms3pro completed AWD swap
-
- Site Admin
- Posts: 39622
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Question on Canbus
To work together they must:
- use the same CAN baud rate
- use different CAN message addresses
James
- use the same CAN baud rate
- use different CAN message addresses
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Master MS/Extra'er
- Posts: 706
- Joined: Sat Mar 17, 2012 10:13 pm
Re: Question on Canbus
So if I understand correctly I couldn’t run a micro as a io either because I it wouldn’t be the same baud ratejsmcortina wrote: ↑Sun Mar 24, 2024 3:55 am To work together they must:
- use the same CAN baud rate
- use different CAN message addresses
James
98 VW golf gti vr6 turbo 8:5:1 cr ported and polished full ferrea race valves train 276 cams custom short runner intake Borge 366 sx-e turbo forge wossner pistons, balanced rotating mass, limited slip 6 speed deka 750Lbs injectors on ms3pro completed AWD swap
-
- Site Admin
- Posts: 39622
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Question on Canbus
Megasquirt uses 500kbps as standard. What do these two devices use?
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".