Megasquirt Knock Module

All questions about MS2/Microsquirt/Microsquirt module. See also MS2/Extra manuals

Moderators: jsmcortina, muythaibxr

Post Reply
QJZ_42
MS/Extra Newbie
Posts: 5
Joined: Sun Nov 14, 2021 11:41 am

Megasquirt Knock Module

Post by QJZ_42 »

Hey guys,

I wasnt able to find the knock module on DIYautotune. Does anybody know if its still available? Are there any suitable replacements?

Thanks,
LanciaDan
Helpful MS/Extra'er
Posts: 97
Joined: Tue Jan 02, 2018 2:52 am
Location: E.U.

Re: Megasquirt Knock Module

Post by LanciaDan »

I had the same problem a few months ago (it was still listed but out of stock) and could not find a replacement. I do not know if they will be produced again but I do hope so.
dontz125
Super MS/Extra'er
Posts: 4228
Joined: Mon May 11, 2009 7:14 pm
Location: York, ON
Contact:

Re: Megasquirt Knock Module

Post by dontz125 »

anclamotorsports.com claims to have stock. I haven't contacted them.
Temporarily shut down - back soon!
QuadraMAP Sensor Module -- PWM-to-Stepper Controller -- Dual Coil Driver
Coming soon: OctoMAP Sensor Module
TTR Ignition Systems
QJZ_42
MS/Extra Newbie
Posts: 5
Joined: Sun Nov 14, 2021 11:41 am

Re: Megasquirt Knock Module

Post by QJZ_42 »

dontz125 wrote: Mon Mar 25, 2024 2:17 pm anclamotorsports.com claims to have stock. I haven't contacted them.
I saw that. Their website looks sketchy though. :D
racingmini_mtl
Super MS/Extra'er
Posts: 9130
Joined: Sun May 02, 2004 6:51 am
Location: Quebec, Canada
Contact:

Re: Megasquirt Knock Module

Post by racingmini_mtl »

Since you're posting in the MS2 section, I assume that's what you have. You should know that the knock module is exclusively for the MS3 so regardless of availability, you cannot use it. With the MS2 you need an external unit.

Jean
jbperf.com Main site . . . . . . . . . . . . . . . . . . . . . . jbperf.com Forum
Image
QJZ_42
MS/Extra Newbie
Posts: 5
Joined: Sun Nov 14, 2021 11:41 am

Re: Megasquirt Knock Module

Post by QJZ_42 »

racingmini_mtl wrote: Mon Mar 25, 2024 9:56 pm Since you're posting in the MS2 section, I assume that's what you have. You should know that the knock module is exclusively for the MS3 so regardless of availability, you cannot use it. With the MS2 you need an external unit.

Jean
My mistake. I have an ms3x. Wasnt paying attention.
Post Reply