<<Previous page ˆˆTop pageˆˆ This page Next page>> Click here for all of the manuals
Megasquirt-3: TunerStudio MS Lite Reference Guide 13.16 VVT Settings Clicking Boost/VVT > VVT Settings displays the following screen: The options for these settings are described below: 13.16.1 VVT Settings No. VVTs Enables VVT control and selects number of cams to control. Cam Decoder The Cam Decoder menu option is only enabled if: • VVT is enabled • AND "Spark Mode" is set to "Toothed Wheel" (see section 10.1) Frequency The Frequency menu option is only enabled if: • VVT is enabled • AND an output is enabled. Sets the VVT solenoid PWM frequency typically 200Hz or higher. (c) 2014-8 James Murray 2018-07-08 Page 216/356 | |||