My MegaLogViewer HD 4.2 .06 has stopped displaying data in the histogram cells when I load more than two logs. It will show or play the data track if I click on the log display below, but no histogram data or color. The scatter plots are populated just fine with multiple logs loaded. HD used to load 5 or 6 logs and display histograms, now it balks at more than 1 and I have to close the program to get it back to displaying even one file.
I'm missing something, is there a limit on size or number of logs you can analyze?
Histogram not displaying data with multiple logs
Moderator: LT401Vette
Histogram not displaying data with multiple logs
Lotus Esprit w/MS3x, COP, Sequential, GM TB&IAC. Hall sensor on 36-2 crank,1 pin VR cam. MapDaddy, AEM X WBO2, Clock&Knock boards.
Subaru WRX hybrid w/MS3PNPPro SW0205, STi cams, VF39 turbo, 830cc injectors, VW boost solenoid.
MS3 1.5.1
TS v3.0.28
Subaru WRX hybrid w/MS3PNPPro SW0205, STi cams, VF39 turbo, 830cc injectors, VW boost solenoid.
MS3 1.5.1
TS v3.0.28
-
- Super MS/Extra'er
- Posts: 12733
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Histogram not displaying data with multiple logs
What size logs are you loading?
Nothings changed there for a while, The limit is really just the amount of memory allocated to it.
The histogram itself doesn't know anything about the number of logs loaded to the data set.
Nothings changed there for a while, The limit is really just the amount of memory allocated to it.
The histogram itself doesn't know anything about the number of logs loaded to the data set.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Experienced MS/Extra'er
- Posts: 374
- Joined: Thu May 26, 2016 1:25 pm
- Location: Germany
Re: Histogram not displaying data with multiple logs
I actually had the same problem a few days ago. I also couldn't select RPM on the X-axis. Everything worked fine again after I reinstalled it.
My project: Link