I have loaded 2.4.08 TS and ordered a 10hz GPS. Now that we can log good GPS data, will it be possible to convert this data to produce a map and be able to link the other logged data to a specific location on that map in much the same way as MSDroid.
This would be invaluable when trying to determine just what is happening at any particular point on a race track.
GPS Data
Moderator: LT401Vette
-
LT401Vette
- Super MS/Extra'er
- Posts: 12733
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: GPS Data
It will be...
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
Trump
- Experienced MS/Extra'er
- Posts: 238
- Joined: Fri Oct 15, 2010 4:41 pm
- Location: Sydney,Australia
Re: GPS Data
Great 
Triumph TR3A. MS3X, IBT, Fully Sequential Injection, Wasted spark, 60-2 crank wheel.
-
Trump
- Experienced MS/Extra'er
- Posts: 238
- Joined: Fri Oct 15, 2010 4:41 pm
- Location: Sydney,Australia
Re: GPS Data
There is a need for performance figures and the data is now being logged. Is it possible to include a drop down screen in MV that will give these. What I am looking for is for example, 0 to 100kph times, 1500 to 2500RPM times, 60 to 80kph time etc with user input on the parameters? This would be very useful in tuning.
Triumph TR3A. MS3X, IBT, Fully Sequential Injection, Wasted spark, 60-2 crank wheel.