Changing Layout
Moderators: jsmcortina, muythaibxr
Changing Layout
I have the Shadow Dash app on my Note 20 and I need to change some things in the layout. Is it only possible to do that while it's connected to the ECU or through Tuner Studio? Or am I missing something simple as usual?
2004 Cobra, MS3PNP, flex fuel, knock sensor, Whipple, etc.
AKA: 01yellerCobra
AKA: 01yellerCobra
-
- Super MS/Extra'er
- Posts: 12733
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: Changing Layout
You need to change the layout in TS.
Send the dash to your table, and load the .dash file on Shadow Dash.
Or, here is a lot more detail about when the dash files are on your table:
https://www.tunerstudio.com/index.php/s ... ow-dash-ms
Send the dash to your table, and load the .dash file on Shadow Dash.
Or, here is a lot more detail about when the dash files are on your table:
https://www.tunerstudio.com/index.php/s ... ow-dash-ms
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Re: Changing Layout
I had a feeling that was the case. I was sitting on my couch and l was wanting to play with some things on my phone. Thank you.
2004 Cobra, MS3PNP, flex fuel, knock sensor, Whipple, etc.
AKA: 01yellerCobra
AKA: 01yellerCobra