AFR/Lambda
Moderator: LT401Vette
AFR/Lambda
It would be nice to have some way to switch the AFR table to display Lambda or vice versa on the fly, both being able to accept numbers and changes.
-
- Super MS/Extra'er
- Posts: 12733
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: AFR/Lambda
That is actually just ini work.
Support for that was put into TunerStudio many years ago. I guess we just haven't thought to update the ini, or no one asked asked .
So, it is really a James/Ken thing. I'd be fine with making the updates and sending them to them if they wanted. It is not a very complex change.
Support for that was put into TunerStudio many years ago. I guess we just haven't thought to update the ini, or no one asked asked .
So, it is really a James/Ken thing. I'd be fine with making the updates and sending them to them if they wanted. It is not a very complex change.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Re: AFR/Lambda
Yeah, it would be super useful to have a button that would swap, or even one that displayed both at same time.
Re: AFR/Lambda
Agree, this would be a useful feature.
Megasquirt remote tuning specialist - Miata/Mustang/BMW - www.aimtuning.com
-
- Super MS/Extra'er
- Posts: 12733
- Joined: Sat Jul 16, 2005 8:07 am
- Location: Moorseville, NC
- Contact:
Re: AFR/Lambda
Attached is a modified ini that adds a preference to the "Gauge and Settings limits" dialog for EGO Table preference.
It allows for AFR, Lambda or Equivalency Ratio and will update on the fly.
This particular ini is for MS3 standard cased with 1.6 alpha 3 firmware.
It allows for AFR, Lambda or Equivalency Ratio and will update on the fly.
This particular ini is for MS3 standard cased with 1.6 alpha 3 firmware.
- Attachments
-
- MS3Format0592.02.ini.zip
- (184.56 KiB) Downloaded 11 times
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
-
- Master MS/Extra'er
- Posts: 706
- Joined: Sat Mar 17, 2012 10:13 pm
Re: AFR/Lambda
Did this make it into
The new firmware?
The new firmware?
98 VW golf gti vr6 turbo 8:5:1 cr ported and polished full ferrea race valves train 276 cams custom short runner intake Borge 366 sx-e turbo forge wossner pistons, balanced rotating mass, limited slip 6 speed deka 750Lbs injectors on ms3pro completed AWD swap
-
- Experienced MS/Extra'er
- Posts: 207
- Joined: Fri Mar 25, 2011 11:51 am
- Location: Finland
- Contact:
Re: AFR/Lambda
Sorry post but want ask there is way get both sametime ?
https://www.facebook.com/PikkiS-112502032715453/
https://www.theniceman.com/coppermine/
Ford Taunus Coupe 1975 2.0i Turbo
Ms3 + MS3x in Taunus
MS3 Pro Ultimate in PikkiS
https://www.theniceman.com/coppermine/
Ford Taunus Coupe 1975 2.0i Turbo
Ms3 + MS3x in Taunus
MS3 Pro Ultimate in PikkiS